Foil fusing is a well proven process used to apply foil to toner image
areas that have been imprinted with either a laser printer or a copy
machine.
The FT-10 is a hand fed fuser designed for limited production
applications. FT-10 features include 12.6" wide maximum paper width,
manual impression control, foil unwind and rewind tension adjustment,
electronic speed and temperature range controls.
The FT-10 can support a single 500' foil roll wound on a standard 1"
core.
The introduction of the hand fed FT-10, Manual and Automatic Foil-Tech
models have made foil fusing a practical process. Using THERM-O-TYPE
foil fusing equipment and supplies, flat foil jobs can be produced
without the need to purchase a foil stamping die or expensive foil
stamping equipment. No special makeready supplies or skills are required
to produce beautiful foil stamping using THERM-O-TYPE foil fusing
models.
The FT-10 can also be used with the Freedom Foil Process that allows
foil text and graphics to be fused over a toner background. The Freedom
Foil Process has proven especially important for customers producing
soft and hard book covers, prototype packaging (boxes) and greeting
cards.
Scratch off foil products can also be produced on the FT-10 using the
Freedom Foil Process and Scratch Off Foil Laminating Film.
For additional information on foil fusing capabilities and limitations,
please review the "Foil Fusing Q & A" section in this web site.
Video information is also available showing the FT-10 foil fuser and the
Freedom Foil Process in operation.
FT-10 Foil Fuser
