Fusing Film 8" x 100' - 1/2" Cores
THERM-O-TYPE fusing films on half inch cores fits competitive foil
fusing equipment. All rolls are 8" wide by 100' long and are mounted on
1/2" cores. Custom lengths are also available.
THERM-O-TYPE 8" x 100' rolls provide customers with an expanded line of high quality fusing films at affordable prices.
These rolls are NOT designed to work with Foil-Tech equipment. All Foil-Tech models use standard 1" cores.
ThermoFusing gives a spot varnish look to B&W & color toner images
THERM-O-TYPE 8" x 100' rolls provide customers with an expanded line of high quality fusing films at affordable prices.
These rolls are NOT designed to work with Foil-Tech equipment. All Foil-Tech models use standard 1" cores.
ThermoFusing gives a spot varnish look to B&W & color toner images
Coated Fusing Film 8" x 100' on 1/2" Cores
1 Roll fusing film
($10.95) ...........................
(8" x 100' rolls)
Coated
3 Rolls fusing film
($32.85) .........................
(8" x 100' rolls)
Coated
5 Rolls fusing film
($54.75) .........................
(8" x 100' rolls)
Coated
10 Rolls fusing film
($109.50) ....................
(8" x 100' rolls)
Coated
Un-Coated Fusing Film 8" x 100' on 1/2" Cores
1 Roll fusing film
($8.49) ..............................
(8" x 100' rolls)
Un-Coated
3 Rolls fusing film
($25.47) .........................
(8" x 100' rolls)
Un-Coated
5 Rolls fusing film
($42.45) .........................
(8" x 100' rolls)
Un-Coated
10 Rolls fusing film
($84.90) .......................
(8" x 100' rolls)
Un-Coated
Fusing Film - Coated
Film is available with or without release agent coating.
Customers who need to Therm-O-Fuse and Foil-Fuse in one pass
should use film with a release agent applied to assure that
toner is not pulled from the sheet by the film during the
higher temperature foil fusing process.
Customers who Therm-O-Fuse in a separate pass can use a lower fusing temperature and do not require a release coating on the film.
Customers who Therm-O-Fuse in a separate pass can use a lower fusing temperature and do not require a release coating on the film.
Fusing Film - Un-Coated
Therm-O-Fusing with un-coated fusing film is typically run
at 220 degrees F. Therm-O-Fusing at higher temperatures with
un-coated film may pull toner off the sheet as the toner may
bond to the film.