THERM-O-TYPE Fusing Film on Half Inch Cores

Fusing Film on 12" x 100' on 1/2" Cores
Printer Version Contact Us Home All Foils and Films
	THERM-O-TYPE fusing films on half inch cores fits competitive foil fusing equipment. All rolls are 12" wide by 100' long and are mounted on 1/2" cores. Custom lengths are also available. THERM-O-TYPE 12" x 100' rolls provide customers with an expanded line of high quality fusing films at affordable prices. These rolls are NOT designed to work with Foil-Tech equipment. All Foil-Tech models use standard 1" cores.
ThermoFusing gives a spot varnish look to B&W & color toner images

Coated Fusing Film 12" x 100' - 1/2" Cores	Film Type

1 Roll fusing film ($16.43).....................(12" x 100' rolls)	Coated
3 Rolls fusing film ($49.29)..................(12" x 100' rolls)	Coated
5 Rolls fusing film ($82.15)..................(12" x 100' rolls)	Coated
10 Rolls fusing film ($164.30)..............(12" x 100' rolls)	Coated
Un-Coated Fusing Film 12" x 100' - 1/2" Cores	Film Type

1 Rolls fusing film ($12.74)...................(12" x 100' rolls)	Un-Coated
3 Rolls fusing film ($38.21)...................(12" x 100' rolls)	Un-Coated
5 Rolls fusing film ($63.68)...................(12" x 100' rolls)	Un-Coated
10 Rolls fusing film ($127.35)...............(12" x 100' rolls)	Un-Coated

Fusing Film - Coated
Film is available with or without release agent coating. Customers who need to Therm-O-Fuse and Foil-Fuse in one pass should use film with a release agent applied to assure that toner is not pulled from the sheet by the film during the higher temperature foil fusing process.
Customers who Therm-O-Fuse in a separate pass can use a lower fusing temperature and do not require a release coating on the film.
Fusing Film - Un-Coated
Therm-O-Fusing with un-coated fusing film is typically run at 220 degrees F. Therm-O-Fusing at higher temperatures with un-coated film may pull toner off the sheet as the toner may bond to the film.
Contact Us E-Mail:thermotype@aol.com Home