Model MP-12 |
| Printer Version Business Card Boxes Model Comparison |
 |
 |
The unique "blade cassette" can be changed in three minutes, without any tools. When blades need to be replaced, due to wear or damage, a new cassette can be received overnight from THERM-O-TYPE. After installing the new cassette, the old cassette is returned for rebuilding. |
|
THERM-O-TYPE MP-12 Business Card Slitters are the most
advanced and productive twelve-up business card slitter available. Up to 40,000 four-up
business card strips can be slit per hour, producing 160,000 finished cards. The MP-12
feature a unique blade "cassette" which allows blade changes, due to dull or
damaged blades, to be completed in less than three minutes. Special "blade
wicks" are mounted in the cassette to continuously clean and lightly lubricate the
blades. The dual, "Wide Grip" friction feeder increases feed wheel contact to the paper, improving feeding. The alignment system has been improved to allow extremely accurate registration during high speed operation. The "fan out" section on the MP uses the patented design which hasbeen used successfully over the years on the GLS and SL slitters. The MP-12 uses 45" long, dual slow delivery conveyors with full length partitions. As jams can occur at the end of the delivery conveyor if there is a gap between the shingled cards, the MP-12 has a dual sensor control which starts the conveyor when paper is being fed, and automatically stops when the feed has been interrupted. Customers, who require maximum production, reliability, precision and dependability, will appreciate that the four and twelve-up, MP model slitters are in a class by themselves. For additional information on the MP-12 Slitter, call 800-237-9630. A streaming video is also available. |
|
|