Stand Alone Air Feeder – THERM-O-TYPE manufactures two "offset press style"" stand alone suction feeder models which have been designed for use with laser die cutters, UV/Aqueous coaters, curing ovens, etc..
The Zip stand alone air feeders are available with two different speed control systems, and can be used with or without an alignment table.
To provide maximum flexibility, feeder controls are ambidextrous.
Capabilities
Zip Air Feeders are available with two different types of speed control for two different speed ranges.
One control version is for applications requiring paper feeding at speeds ranging from 100 to 1,100 sheets per hour. This stand alone air feeder uses an internal pulse generator, with potentiometer, to precisely time feed cycles. Laser die cutters are one example where the paper feed rate would fall within this range.
The second control version is for applications requiring paper feeding at speeds ranging from 1,000 to 6,000 sheets per hour. These feeders use a variable speed drive motor. UV/Aqueous coaters are an example where the paper feed rate would fall within this range.
When the air feeder is used for UV coating, for example, a registration table is typically not needed.
The Stand Alone Air Feeder can be purchased with an optional alignment table.
When the stand alone air feeder is used for certain applications, a registration table is required.
The optional alignment tables feature precise side-to-side registration and skew adjustment.
Features
- “Offset Press” Suction Feeder
- 14.5” Wide by 20.5” Long Max. Size Model Available
- 20” Wide by 20.5” Long Max Size Model Available
- Start/Stop Pushbuttons
- 13.5 inch Paper Capacity
- Pile Height Adjustment
- Double Sheet Detect/Interrupt
- “Big Foot” Suckers
- Adjustable Suction Control
- Feeder Blower to Float Sheets
- Mounted on Casters
- Available W/or/Wo Alignment Table
- Available Wired for 110 or 220 volts
- Requires 80 psi Compressed Air Line
Info
Videos
Pictures
